Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
EN AW-7022, 10 mm clamp-frame model inputs (CC BY)
source-identified EN AW-7022 clamp-frame material-model input; temper not stated | 10 mm thick clamp frame in the reproduced blast-test validation setup
|
|---|---|
| Density |
2700.0 kg/m^3
Density
Source Reported Finite Element Input Screening
source-reported EN AW-7022 material model for the 10 mm clamp frame in the blast-test validation setup
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
70.0 GPa
Young's modulus
Source Reported Finite Element Input Screening
source-reported EN AW-7022 material model for the 10 mm clamp frame in the blast-test validation setup
|
| Shear modulus |
26.32 GPa
Shear modulus
Derived
Calculated from Young's modulus / (2 * (1 + Poisson's ratio)).
|
| Poisson's ratio |
0.33 -
Poisson's ratio
Source Reported Finite Element Input Screening
source-reported EN AW-7022 material model for the 10 mm clamp frame in the blast-test validation setup
|
| Yield strength |
450.0 MPa
Yield strength
Source Reported Finite Element Input Screening
source-reported EN AW-7022 material model for the 10 mm clamp frame in the blast-test validation setup
|
| Tensile strength |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|