Material picker
0 selected Select up to 5 materials for a readable table.
Comparison

1 materials

Property AA7003 high-Si water-quenched T6 extruded profile (CC BY experimental)
AA7003 high-Si heat, water quenched and artificially aged to study condition T6 | solid rectangular extruded profile
Density
Not listed
Not listed for this material record, condition, or selected unit system.
Thermal conductivity
Not listed
Not listed for this material record, condition, or selected unit system.
Specific heat capacity
Not listed
Not listed for this material record, condition, or selected unit system.
Young's modulus
Not listed
Not listed for this material record, condition, or selected unit system.
Shear modulus
Not listed
Not listed for this material record, condition, or selected unit system.
Poisson's ratio
Not listed
Not listed for this material record, condition, or selected unit system.
Yield strength
357.0 MPa
Tensile yield strength
Experimental Measured Screening
AA7003 high-Si heat (Fe 0.20, Mg 0.68, Si 0.11, Zn 5.56, Cu 0.01, Zr 0.17, Ti 0.02 wt.%), 20 x 25 mm extruded profile; H-WQ-T6; one slow-strain-rate tensile test in air; initial rate reported as 1.2e-8 m/s; five electrical-conductivity measurements
Tensile strength
374.0 MPa
Ultimate tensile strength
Experimental Measured Screening
AA7003 high-Si heat (Fe 0.20, Mg 0.68, Si 0.11, Zn 5.56, Cu 0.01, Zr 0.17, Ti 0.02 wt.%), 20 x 25 mm extruded profile; H-WQ-T6; one slow-strain-rate tensile test in air; initial rate reported as 1.2e-8 m/s; five electrical-conductivity measurements
Elongation at break
Not listed
Not listed for this material record, condition, or selected unit system.
Maximum service temperature
Not listed
Not listed for this material record, condition, or selected unit system.