Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
EN AW-6014-T4 sheet, 2.0 mm, elasticity and flow model (CC BY experimental)
EN AW-6014 automotive aluminium sheet in T4 temper used for multi-stress-state forming tests | sheet
|
|---|---|
| Density |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Shear modulus |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Poisson's ratio |
0.34 -
Poisson's ratio
Assumed Model Parameter Screening
EN AW-6014-T4 automotive sheet, 2.0 mm thick; tensile specimens aligned to rolling direction and layer-compression stacks with aligned rolling directions; strain rate 0.001 1/s; test temperature and replicate counts not stated
|
| Yield strength |
130.4 MPa
Calibrated initial yield stress
Reported Constitutive Parameter Screening
EN AW-6014-T4 automotive sheet, 2.0 mm thick; tensile specimens aligned to rolling direction and layer-compression stacks with aligned rolling directions; strain rate 0.001 1/s; test temperature and replicate counts not stated
|
| Tensile strength |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|