Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
Aluminum 7075-T6/T651/T62 bar and rod, <=75 mm (MIL-HDBK-5H)
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm | rolled, drawn or cold-finished bar or rod
|
|---|---|
| Density |
2796 kg/m^3
Density
Historical Nominal
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
71.016 GPa
Young's modulus
Historical Nominal
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in
|
| Shear modulus |
26.89 GPa
Shear modulus
Historical Nominal
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in
|
| Poisson's ratio |
0.33 -
Poisson's ratio
Historical Nominal
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in
|
| Yield strength |
455.054 MPa
Tensile yield strength, L
Historical Public Release Table Value
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in; L direction
434.37 MPa
Tensile yield strength, LT
Historical Public Release Table Value
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in; LT direction
441.264 MPa
Compressive yield strength, L
Historical Public Release Table Value
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in; L direction
|
| Tensile strength |
530.896 MPa
Ultimate tensile strength, L
Historical Public Release Table Value
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in; L direction
496.423 MPa
Ultimate tensile strength, LT
Historical Public Release Table Value
7075-T6/T651/T62; rolled, drawn or cold-finished bar/rod; <=75 mm; lower A-basis value across <=3.000 in; LT direction
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|