Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
AISI 301 1/2 hard sheet/strip (MIL-HDBK-5H)
AISI 301; 1/2 hard; sheet or strip | sheet or strip
|
|---|---|
| Density |
7916 kg/m^3
Density
Historical Nominal
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
193.053 GPa
Young's modulus
Historical Nominal
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation; LT direction
|
| Shear modulus |
72.395 GPa
Shear modulus
Historical Nominal
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation
|
| Poisson's ratio |
0.27 -
Poisson's ratio
Historical Nominal
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation
|
| Yield strength |
641.212 MPa
Tensile yield strength, L
Historical Public Release Table Value
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation; L direction
420.58 MPa
Compressive yield strength, L
Historical Public Release Table Value
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation; L direction
|
| Tensile strength |
972.161 MPa
Ultimate tensile strength, L
Historical Public Release Table Value
AISI 301; 1/2 hard; sheet or strip; A-basis strengths; S-basis minimum elongation; L direction
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|