Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
Inconel 625 annealed sheet, <=6.3 mm (MIL-HDBK-5H)
Inconel 625; annealed sheet; <=6.3 mm | sheet
|
|---|---|
| Density |
8442 kg/m^3
Density
Historical Nominal
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
205.464 GPa
Young's modulus
Historical Nominal
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns
|
| Shear modulus |
81.358 GPa
Shear modulus
Historical Nominal
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns
|
| Poisson's ratio |
0.28 -
Poisson's ratio
Historical Nominal
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns
|
| Yield strength |
365.422 MPa
Tensile yield strength, L
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; L direction
372.317 MPa
Tensile yield strength, LT
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; LT direction
379.212 MPa
Compressive yield strength, L
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; L direction
386.106 MPa
Compressive yield strength, LT
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; LT direction
|
| Tensile strength |
813.581 MPa
Ultimate tensile strength, L
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; L direction
820.476 MPa
Ultimate tensile strength, LT
Historical Public Release Table Value
Inconel 625; annealed sheet; <=6.3 mm; lower A/S-basis value across the <=0.250 in columns; LT direction
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|