Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
Inconel 718 ST investment casting, <=12.7 mm (MIL-HDBK-5H)
Inconel 718; ST; investment casting; <=12.7 mm | investment casting
|
|---|---|
| Density |
8221 kg/m^3
Density
Historical Nominal
Inconel 718; ST; investment casting; <=12.7 mm; S-basis
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
202.706 GPa
Young's modulus
Historical Nominal
Inconel 718; ST; investment casting; <=12.7 mm; S-basis
|
| Shear modulus |
78.6 GPa
Shear modulus
Historical Nominal
Inconel 718; ST; investment casting; <=12.7 mm; S-basis
|
| Poisson's ratio |
0.29 -
Poisson's ratio
Historical Nominal
Inconel 718; ST; investment casting; <=12.7 mm; S-basis
|
| Yield strength |
723.95 MPa
Tensile yield strength, L
Historical Public Release Table Value
Inconel 718; ST; investment casting; <=12.7 mm; S-basis; L direction
723.95 MPa
Compressive yield strength, L
Historical Public Release Table Value
Inconel 718; ST; investment casting; <=12.7 mm; S-basis; L direction
|
| Tensile strength |
827.371 MPa
Ultimate tensile strength, L
Historical Public Release Table Value
Inconel 718; ST; investment casting; <=12.7 mm; S-basis; L direction
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|