Metal
EN AW-6101A, 5 mm plate assumed model inputs (CC BY)
Exact-grade assumed elastic model inputs for a source-identified 175 x 50 x 5 mm EN AW-6101A plate.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 2700.0 | kg/m^3 |
| Source plate length | 175.0 | mm |
| Source plate width | 50.0 | mm |
| Source plate thickness | 5.0 | mm |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Young's modulus | 70.0 | GPa |
| Shear modulus | 26.1 | GPa |
| Poisson's ratio | 0.34 | - |
Units
Condition
- Condition
- source-identified EN AW-6101A thin-plate workpiece and assumed computational material inputs; temper not stated
- Temper
- not stated
- Heat treatment
- not stated
- Product form
- 175 x 50 x 5 mm thin rectangular plate used for modal tests and ball-end milling
- Thickness / diameter range
- 5 mm plate thickness
- Test direction
- isotropic computational input; source does not identify material direction
- Processing route
- not stated; plate experimentally modal-tested and ball-end milled in an adjustable-stiffness holder
- Temperature range
- The source does not state input temperature or a temperature-dependent validity range.
- Notes
- Assumed elastic inputs for the exact EN AW-6101A plate used in the article's computational/experimental milling study.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI