Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
AA2011 wire rod, 6.00/6.35 mm, tensile and Voce calibration (CC BY experimental)
2011 aluminium wire rods as supplied for tensile and drawing experiments | wire rod
|
|---|---|
| Density |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
68.2 GPa
Young's modulus
Experimental Measured Screening
2011 aluminium commercial wire rods, initial diameters 6.00 and 6.35 mm and length 220 mm; uniaxial tensile test at 5 mm/min with 50 mm DIC gauge length; temper and test temperature not stated
|
| Shear modulus |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Poisson's ratio |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Yield strength |
318.0 MPa
Tensile yield strength
Experimental Measured Screening
2011 aluminium commercial wire rods, initial diameters 6.00 and 6.35 mm and length 220 mm; uniaxial tensile test at 5 mm/min with 50 mm DIC gauge length; temper and test temperature not stated
|
| Tensile strength |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|