Materials
Compare Materials
Compare candidate materials with unit-aware values and condition metadata.
| Property |
EN AW-1050A-H14 cold-rolled sheet, 0.8 mm (CC BY reference)
EN AW-1050A-H14 low-strength, strain-hardened cold-rolled sheet supplied by Norsk Hydro ASA | cold-rolled sheet
|
|---|---|
| Density |
2700.0 kg/m^3
Density
Reported Prior Source Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
|
| Thermal conductivity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Specific heat capacity |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Young's modulus |
70.0 GPa
Young's modulus
Reported Prior Source Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
|
| Shear modulus |
26.92 GPa
Shear modulus
Derived
Calculated from Young's modulus / (2 * (1 + Poisson's ratio)).
|
| Poisson's ratio |
0.3 -
Poisson's ratio
Reported Prior Source Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
|
| Yield strength |
100.0 MPa
Tensile yield strength
Reported Manufacturer Nominal Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
80.0 MPa
Calibrated initial yield stress, RD
Calibrated Constitutive Parameter Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
|
| Tensile strength |
116.0 MPa
Ultimate tensile strength
Reported Manufacturer Nominal Screening
EN AW-1050A-H14 cold-rolled sheet manufactured by Norsk Hydro ASA, 0.8 mm thick; manufacturer nominal strengths apply to the supplied sheet, while calibrated hardening parameters apply to one representative 0 deg tensile test from nine total tests
|
| Elongation at break |
Not listed
Not listed for this material record, condition, or selected unit system.
|
| Maximum service temperature |
Not listed
Not listed for this material record, condition, or selected unit system.
|