Metal
Aluminium 6110A-T6 study context, model inputs (CC BY reference)
Elastic model inputs contextually associated with the article's exact 6110A-T6 study alloy.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 2700.0 | kg/m^3 |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Young's modulus | 69.0 | GPa |
| Poisson's ratio | 0.3 | - |
| Shear modulus | 26.54 | GPa |
Units
Condition
- Condition
- article-identified 6110A-T6 study alloy with contextually associated generic aluminium vehicle-model inputs
- Temper
- T6 for the investigated alloy; Table 1 does not repeat the temper
- Heat treatment
- T6 designation only; prior solution-treatment and ageing schedule not stated
- Product form
- aluminium sheet/substrate coupons; Al-Al epoxy-joint substrates are 2 mm thick
- Thickness / diameter range
- 2 mm for the Al-Al epoxy-joint substrates; generic Table 1 vehicle row has no thickness
- Test direction
- isotropic vehicle finite-element input; coupon rolling direction is not stated
- Processing route
- not stated; coupon surfaces were sanded or grit blasted and solvent cleaned for adhesive bonding
- Temperature range
- The generic aluminium model row does not state a temperature basis or validity range.
- Notes
- The article explicitly identifies the investigated aluminium alloy as 6110A-T6 and later reports one generic 'Aluminium' row for the vehicle model. Associating that row with 6110A-T6 is a contextual inference; the table itself does not print the alloy or temper. The 2 mm Al-Al substrate statement also does not repeat the grade. The retained values are therefore low-confidence screening inputs, not measured coupon properties, current EN minima, supplier guarantees or design allowables.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI