Metal
AA5754-H22 sheet, 1 mm (CC BY experimental)
Measured monotonic tensile properties and hardness for commercial AA5754-H22 sheet.
Properties
Mechanical
| Property | Value | Unit |
|---|---|---|
| Tensile yield strength | 178.0 | MPa |
| Ultimate tensile strength | 250.0 | MPa |
| Young's modulus | 70.0 | GPa |
| Elongation | 13.5 | % |
| Vickers hardness | 72.0 | HV1 |
Units
Condition
- Condition
- commercial AA5754-H22 sheet used in the ultrasonic-joining study
- Temper
- H22
- Heat treatment
- work hardened by rolling and partially annealed to quarter-hard H22 condition
- Product form
- sheet
- Thickness / diameter range
- 1 mm (source specimen 70 x 20 x 1 mm)
- Test direction
- not stated for the Table 1 monotonic tensile values
- Processing route
- commercial wrought sheet supplied by Hydro Aluminium
- Temperature range
- Test temperature is not stated in the cited base-material table.
- Notes
- Experimental values for the study's commercial 1 mm H22 sheet; not a population minimum or EN product specification.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI