EN AW-5005/5005A-H14 sheet, plate and strip <=12.5 mm certificate population (CC BY)

Properties

Mechanical

Property	Value	Unit
Tensile yield strength	154.0	MPa
Observed minimum tensile yield strength	139.0	MPa
Coefficient of variation, tensile yield strength	0.06	-
Ultimate tensile strength	164.0	MPa
Observed minimum ultimate tensile strength	156.0	MPa
Coefficient of variation, ultimate tensile strength	0.04	-

Statistics

Property	Value	Unit
Certificate sample count	23.0	count

Units

Condition

Condition: combined EN AW-5005/5005A H14 certificate population; grades are not separable in the source
Temper: H14
Heat treatment: H14 as recorded on material test certificates; detailed schedules are not reported
Product form: sheet, plate and strip
Thickness / diameter range: thickness <=12.5 mm
Test direction: certificate direction not reported
Processing route: European-market aluminium products represented by industry material test certificates
Temperature range: Certificate/test temperature is not reported for this population; no temperature extrapolation is allowed.
Notes: The article reports AW-5005 and AW-5005A as one combined population, so the values cannot be assigned to either grade separately. Measured certificate-population statistics for combined EN AW-5005 and EN AW-5005A source population; H14; sheet, plate and strip; thickness <=12.5 mm; 23 European-market material-test-certificate results. The article flags groups below 100 samples as insufficient for robust reliability analysis. Imported values are the observed mean, observed minimum and coefficient of variation only; licensed EN nominal values and derived fractiles are deliberately excluded. Not a current product-standard minimum or design allowable.

Standards

No material standards linked.

Record status