Metal
EN AW-6106-T6 extruded profiles <=10 mm certificate population (CC BY)
Measured proof- and tensile-strength statistics for EN AW-6106; T6; extruded profiles; thickness <=10 mm; 57 European-market material-test-certificate results.
Properties
Mechanical
| Property | Value | Unit |
|---|---|---|
| Tensile yield strength | 245.0 | MPa |
| Observed minimum tensile yield strength | 227.0 | MPa |
| Coefficient of variation, tensile yield strength | 0.04 | - |
| Ultimate tensile strength | 273.0 | MPa |
| Observed minimum ultimate tensile strength | 261.0 | MPa |
| Coefficient of variation, ultimate tensile strength | 0.03 | - |
Statistics
| Property | Value | Unit |
|---|---|---|
| Certificate sample count | 57.0 | count |
Units
Condition
- Condition
- EN AW-6106-T6 material-test-certificate population
- Temper
- T6
- Heat treatment
- T6 as recorded on material test certificates; detailed schedules are not reported
- Product form
- extruded profiles
- Thickness / diameter range
- thickness <=10 mm
- Test direction
- certificate direction not reported
- Processing route
- European-market aluminium products represented by industry material test certificates
- Temperature range
- Certificate/test temperature is not reported for this population; no temperature extrapolation is allowed.
- Notes
- Measured certificate-population statistics for EN AW-6106; T6; extruded profiles; thickness <=10 mm; 57 European-market material-test-certificate results. The article flags groups below 100 samples as insufficient for robust reliability analysis. Imported values are the observed mean, observed minimum and coefficient of variation only; licensed EN nominal values and derived fractiles are deliberately excluded. Not a current product-standard minimum or design allowable.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI