Metal
Aluminum 5052-O sheet/plate (MIL-HDBK-5H)
Historical public-release S-basis 5052-O sheet/plate reference.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 2685 | kg/m^3 |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Ultimate tensile strength, L | 172.369 | MPa |
| Tensile yield strength, L | 65.5 | MPa |
| Ultimate shear strength | 110.316 | MPa |
| Elongation, L | 14 | % |
| Young's modulus | 69.637 | GPa |
| Compression modulus | 70.327 | GPa |
| Shear modulus | 26.545 | GPa |
| Poisson's ratio | 0.33 | - |
Units
Condition
- Condition
- 5052-O; sheet/plate; 0.008-3.000 in (0.203-76.2 mm); narrowed from the 0.006 in static table lower bound because elongation is not listed below 0.008 in
- Temper
- O
- Heat treatment
- annealed
- Product form
- sheet and plate
- Thickness / diameter range
- 0.008-3.000 in (0.203-76.2 mm); narrowed from the 0.006 in static table lower bound because elongation is not listed below 0.008 in
- Test direction
- L and LT where listed; elongation L
- Processing route
- wrought non-heat-treatable aluminum-magnesium sheet/plate
- Temperature range
- 21 ... 21 degC
- Notes
- Room-temperature historical handbook values. Applicability is limited to the exact alloy, temper/condition, product form, size band, material axis, statistical basis, and specification identified by the cited table. Historical reference only; confirm the current procurement specification and material test report.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI