Metal
Aluminum 7050-T7651 plate, 6.35-50 mm (MIL-HDBK-5H)
Historical public-release T7651 plate reference through 50 mm.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 2823 | kg/m^3 |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Ultimate tensile strength, L | 524.002 | MPa |
| Tensile yield strength, L | 455.054 | MPa |
| Ultimate tensile strength, LT | 517.107 | MPa |
| Tensile yield strength, LT | 448.159 | MPa |
| Compressive yield strength, L | 441.264 | MPa |
| Compressive yield strength, LT | 468.843 | MPa |
| Ultimate shear strength | 296.475 | MPa |
| Elongation, L | 9 | % |
| Elongation, LT | 8 | % |
| Ultimate tensile strength, ST | 496.423 | MPa |
| Tensile yield strength, ST | 406.791 | MPa |
| Compressive yield strength, ST | 461.949 | MPa |
| Elongation, ST | 1.5 | % |
| Young's modulus | 71.016 | GPa |
| Compression modulus | 74.463 | GPa |
| Shear modulus | 27.579 | GPa |
| Poisson's ratio | 0.33 | - |
Units
Condition
- Condition
- 7050-T7651; plate; 6.35-50 mm
- Temper
- T7651
- Heat treatment
- solution heat treated, stress relieved by stretching and overaged to T76 condition
- Product form
- plate
- Thickness / diameter range
- 0.250-1.969 in (6.35-50 mm), within the 0.250-2.000 in table columns
- Test direction
- L, LT and ST where available; lower listed value across applicable thickness columns
- Processing route
- wrought heat-treatable aluminum-zinc plate
- Temperature range
- 21 ... 21 degC
- Notes
- Room-temperature historical handbook values. Applicability is limited to the exact alloy, temper/condition, product form, size band, material axis, statistical basis, and specification identified by the cited table. Historical reference only; confirm the current procurement specification and material test report.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI