Metal
Stainless steel 301 full-hard sheet (NASA historical reference)
Historical AMS minimum tensile properties for full-hard Type 301 sheet/strip over 0.015 in plus room-temperature density.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 8083 | kg/m^3 |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Ultimate tensile strength | 1275.53 | MPa |
| Tensile yield strength | 965.266 | MPa |
| Elongation | 9 | % |
Units
Condition
- Condition
- Type 301 full-hard sheet or strip; historical AMS minimums
- Temper
- full hard
- Heat treatment
- cold worked to full-hard condition
- Product form
- sheet or strip
- Thickness / diameter range
- greater than 0.015 in (0.38 mm)
- Test direction
- for width >=9 in, perpendicular to rolling; for width <9 in, parallel to rolling
- Processing route
- cold-worked austenitic stainless sheet or strip
- Temperature range
- 21 ... 21 degC
- Notes
- Historical reference data transcribed with the stated property semantics and SI conversions. Confirm against the official PDF, a current procurement specification, the actual product form and thickness, and a material test report before engineering use.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI