Metal
17-4PH H1050 plate, 54 mm, ST (NASA experimental)
Measured H1050 short-transverse tensile properties for one 54 mm 17-4PH plate heat.
Properties
Mechanical
| Property | Value | Unit |
|---|---|---|
| Ultimate tensile strength, ST | 1082.0 | MPa |
| Tensile yield strength, ST | 1054.0 | MPa |
| Elongation, ST | 4.0 | % |
Units
Condition
- Condition
- 17-4PH heat 690254; H1050; 5.4 cm plate
- Temper
- H1050
- Heat treatment
- H1050 as reported; detailed schedule is not restated in Table 2
- Product form
- plate
- Thickness / diameter range
- 5.4 cm (54 mm)
- Test direction
- ST (short transverse)
- Processing route
- wrought plate from identified heat 690254
- Temperature range
- Table 2 does not state a test temperature; no temperature extrapolation is allowed.
- Notes
- Measured values for one identified 17-4PH heat in 5.4 cm H1050 plate; not a thin-sheet value, population minimum, or procurement specification.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI