Polymer
RadonPy PI1013, polyimide amorphous MD model
Open RadonPy computational screening card for a polyimide repeat unit with available amorphous-state physical, thermal, mechanical, dielectric, and optical predictions.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 1183.874742 | kg/m^3 |
Thermal
| Property | Value | Unit |
|---|---|---|
| Specific heat capacity, cp | 2672.747253 | J/kg/K |
| Specific heat capacity, cv | 2633.454001 | J/kg/K |
| Volumetric thermal expansion coefficient | 0.000225741 | 1/K |
| Linear thermal expansion coefficient | 7.52e-05 | 1/K |
| Thermal conductivity | 0.210880706 | W/m/K |
| Thermal diffusivity | 6.66e-08 | m^2/s |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Bulk modulus | 3.030544185 | GPa |
| Isentropic bulk modulus | 3.075726281 | GPa |
Electrical
| Property | Value | Unit |
|---|---|---|
| Static dielectric constant, dipole-fluctuation term | 72.14725113 | - |
| Static dielectric constant, electronic-corrected | 73.65042823 | - |
Identity
| Property | Value | Unit |
|---|---|---|
| Repeat-unit SMILES | *c1ccc(Oc2ccc(C(c3ccc(Oc4ccc(N5C(=O)c6ccc(Oc7ccc(C8(c9ccc(Oc%10ccc%11c(c%10)C(=O)N(*)C%11=O)cc9)CCC(C(C)(C)C)CC8)cc7)cc6C5=O)cc4)cc3)(C(F)(F)F)C(F)(F)F)cc2)cc1 | - |
| RadonPy polymer class | 13: polyimide | - |
Model
| Property | Value | Unit |
|---|---|---|
| Number-average molecular mass | 8822.814 | g/mol |
| Degree of polymerization | 8 | - |
Optical
| Property | Value | Unit |
|---|---|---|
| Refractive index | 1.58214127 | - |
Units
Condition
- Condition
- amorphous homopolymer computational model
- Product form
- periodic molecular-dynamics cell
- Thickness / diameter range
- Not applicable to the computational cell.
- Test direction
- Bulk isotropic modeled response.
- Processing route
- RadonPy automated all-atom classical molecular-dynamics workflow.
- Temperature range
- 300 ... 300 K
- Notes
- Classical MD screening result, not a measured grade datasheet. The method paper reports property-dependent bias/correlation limitations; additives, crystallinity, cure, aging, processing, and commercial-grade variation are not represented.
Standards
No material standards linked.
Record status
- Category
- Polymer
- Unit system
- Common SI