Polymer
RadonPy PI640, polyamide amorphous MD model
Open RadonPy computational screening card for a polyamide repeat unit with available amorphous-state physical, thermal, mechanical, dielectric, and optical predictions.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 1067.141423 | kg/m^3 |
Thermal
| Property | Value | Unit |
|---|---|---|
| Specific heat capacity, cp | 3331.780503 | J/kg/K |
| Specific heat capacity, cv | 3235.304401 | J/kg/K |
| Volumetric thermal expansion coefficient | 0.000305572 | 1/K |
| Linear thermal expansion coefficient | 0.000101857 | 1/K |
| Thermal conductivity | 0.257140127 | W/m/K |
| Thermal diffusivity | 7.25e-08 | m^2/s |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Bulk modulus | 3.560063092 | GPa |
| Isentropic bulk modulus | 3.66205692 | GPa |
Electrical
| Property | Value | Unit |
|---|---|---|
| Static dielectric constant, dipole-fluctuation term | 1.426669591 | - |
| Static dielectric constant, electronic-corrected | 2.882630621 | - |
Identity
| Property | Value | Unit |
|---|---|---|
| Repeat-unit SMILES | *NC(=O)c1ccc(cc1)C(c1ccc(cc1)C(=O)NCCCCCC*)(C)C | - |
| RadonPy polymer class | 10: polyamide | - |
Model
| Property | Value | Unit |
|---|---|---|
| Number-average molecular mass | 6590.872 | g/mol |
| Degree of polymerization | 18 | - |
Optical
| Property | Value | Unit |
|---|---|---|
| Refractive index | 1.567150219 | - |
Units
Condition
- Condition
- amorphous homopolymer computational model
- Product form
- periodic molecular-dynamics cell
- Thickness / diameter range
- Not applicable to the computational cell.
- Test direction
- Bulk isotropic modeled response.
- Processing route
- RadonPy automated all-atom classical molecular-dynamics workflow.
- Temperature range
- 300 ... 300 K
- Notes
- Classical MD screening result, not a measured grade datasheet. The method paper reports property-dependent bias/correlation limitations; additives, crystallinity, cure, aging, processing, and commercial-grade variation are not represented.
Standards
No material standards linked.
Record status
- Category
- Polymer
- Unit system
- Common SI