Metal
EN AW-2014A TDCB substrate model inputs (CC BY reference)
Exact-grade EN AW-2014A density, elastic and strength inputs reported for a TDCB finite-element model.
Properties
Physical
| Property | Value | Unit |
|---|---|---|
| Density | 2700.0 | kg/m^3 |
Mechanical
| Property | Value | Unit |
|---|---|---|
| Young's modulus | 72.4 | GPa |
| Poisson's ratio | 0.33 | - |
| Shear modulus | 27.22 | GPa |
| Tensile yield strength | 430.0 | MPa |
| Ultimate tensile strength | 485.0 | MPa |
Units
Condition
- Condition
- source-identified EN AW-2014A TDCB substrate represented by the article's aluminium FE inputs
- Temper
- not stated; do not infer T6 or another registered temper
- Heat treatment
- bulk-alloy heat treatment not stated; the bonding surface was grit blasted and chromic-sulphuric-acid etched
- Product form
- tapered double cantilever beam (TDCB) aluminium substrate
- Thickness / diameter range
- substrate dimensions are not numerically stated in the main article text/table
- Test direction
- isotropic finite-element input; substrate direction is not stated
- Processing route
- bulk-product route not stated; acetone cleaning, grit blasting and chromic-sulphuric-acid etching were used for bonding
- Temperature range
- Table 1 does not state a temperature basis or temperature-dependent validity range.
- Notes
- The article identifies the TDCB substrates as grade EN AW-2014A and uses the Table 1 aluminium values in its finite-element model. The values are attributed to references [17]-[18], not reported as measurements on the bonded substrates. Temper, product route, direction, batch statistics and a yield-definition method are not stated. These are source-reported model inputs, not current EN minima, supplier guarantees or design allowables.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI