Metal
Aluminum 3003-H24 plate and sheet (QQ-A-250/2E)
Historical Aluminum 3003-H24 plate and sheet requirements from public-release QQ-A-250/2E Table II.
Properties
Mechanical
| Property | Value | Unit |
|---|---|---|
| Ultimate tensile strength, L | 137.895 | MPa |
| Elongation, L | 1 | % |
Units
Condition
- Condition
- Aluminum 3003-H24, historical QQ-A-250/2E minimums
- Temper
- H24
- Heat treatment
- as defined by the historical temper designation
- Product form
- plate and sheet
- Thickness / diameter range
- 0.009-1.000 in (0.2286-25.4 mm)
- Test direction
- longitudinal / parallel to direction of working
- Processing route
- rolled
- Temperature range
- 21 ... 21 degC
- Notes
- Room-temperature historical federal-specification requirements limited to the exact alloy, temper, product form, size range and direction stated by this card. Confirm a current procurement specification and material test report before use.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI