Metal
EN AW-6060-T6 extruded I-beam tensile group 1 (CC BY experimental)
Room-temperature tensile means and 95% measurement errors for six group-1 coupons cut parallel to an EN AW-6060-T6 extrusion.
Properties
Mechanical
| Property | Value | Unit |
|---|---|---|
| Tensile yield strength | 181.5 | MPa |
| Ultimate tensile strength | 209.8 | MPa |
| Young's modulus | 66.4 | GPa |
| Elongation | 8.2 | % |
Units
Condition
- Condition
- EN AW-6060 peak temper T6; group 1 long flat coupons cut from extruded I-beam I 160 x 88 x 6.5 x 5
- Temper
- T6 (peak temper condition)
- Heat treatment
- T6; detailed solution/cooling/artificial-aging schedule not stated
- Product form
- extruded I-beam I 160 x 88 x 6.5 x 5
- Thickness / diameter range
- 5 mm thick tensile coupons from 500 mm I-beam sections
- Test direction
- parallel to extrusion direction (0 deg)
- Processing route
- extruded I-beam; tensile coupons waterjet cut to limit heating
- Temperature range
- 20 ... 25 degC
- Notes
- Experimental mean values for six group-1 coupons with the article's 95 percent measurement errors (Student t, five degrees of freedom); exact I-beam, coupon geometry, direction and loading rate apply. Not EN minima.
Standards
No material standards linked.
Record status
- Category
- Metal
- Unit system
- Common SI